connectors (inlets/outlets) 257 www.schurter.com/pg0 7 connectors iec appliance inlet c8, screw-on mounting, front side, solder or quick-connect or print terminal c8 70 c description - panel mount: screw-on mounting, from front side - appliance inlet, pin temperature 70 c, protection class ii approvals - vde license number: 40002274 - ul license number: e96454 - csa license number: 27324 references general product informatio n weblinks approval s , roh s , china-roh s , mating connector s , distributor-stock- chec k , accessorie s technical data ratings iec 2.5 a / 250 vac; 50 hz ratings ul/csa 2.5 a / 250 vac; 60 hz dielectric strength > 3 kvac between l-n > 1.5 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -25 c to 70 c degree of protection from front side ip 20 acc. to iec 60529 protection class suitable for appliances with protection class 2 acc. to iec 61140 material: housing ul 94v-0 appliance inlet c8 acc. to iec/en 60320-1 ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 2.5 a, protection class 2 dimensions 37 mm 19.2 10.6 16 10.4 19 37 15.5 2.5 28 28 10 r <4 +0.2 - 0 +0.2 - 0 ? 3.2 lenght of the terminal please find at the order code configuration table
2 connectors (inlets/outlets) 257 www.schurter.com/pg0 7 connectors config. code product configurato r 2571 | - | h | - | a | b | c | 0- | d | - | e | g | f | the characters are placeholders for the correspondingly keys of selections from the key tables. 2571 | - | h | - | a | b | c | 0- | d | - | e | g | f | = type type configuration key protection class 2 b 2571 | - | h | - | a | b | c | 0- | d | - | e | g | f | = terminals terminal l configuration key short solder terminal (l=4,8mm) 2 long solder terminal (l=8,5mm) 3 pcb-terminal (short) 5 pcb-terminal (long) 6 blade terminal (2,8x0,8mm) 7 2571 | - | h | - | a | b | c | 0- | d | - | e | g | f | = terminals terminal n configuration key short solder terminal (l=4,8mm) 2 long solder terminal (l=8,5mm) 3 pcb-terminal (short) 5 pcb-terminal (long) 6 blade terminal (2,8x0,8mm) 7 symbols similar as in table a 2571 | - | h | - | a | b | c | 0- | d | - | e | g | f | = terminals terminal ground configuration key without terminal 0 symbols similar as in table a 2571 | - | h | - | a | b | c | 0- | d | - | e | g | f | = color color configuration key jet black; ral9005 a silver grey; ral7001 b pure white; ral9010 d standard color: black 2571 | - | h | - | a | b | c | 0- | d | - | e | g | f | = style style configuration key flange with countersunk holes 1 flange with through holes 2 2571 | - | h | - | a | b | c | 0- | d | - | e | g | f | = dimension x dimension "x" configuration key 00 the dimension "x" is dispalyed in ( 1 / 10 mm). this information is also valid for the order code 2571 | - | h | - | a | b | c | 0- | d | - | e | g | f | = orientation of terminals orientation of terminals configuration key horizontal a vertical b variants config. code description order number 2571-x-2200-a-100b 2571, iec appliance inlet c8, 70c, schutzklasse 2, l: short solder terminal (l=4,8mm), n: short solder terminal (l=4,8mm), erde: without terminal, farbe jet black; ral9005, bauform: flange with countersunk holes, mass x: 00 6160.0004 2571-x-3300-a-100b 2571, iec appliance inlet c8, 70c, schutzklasse 2, l: long solder terminal (l=8,5mm), n: long solder terminal (l=8,5mm), erde: without terminal, farbe jet black; ral9005, bauform: flange with countersunk holes, mass x: 00 6160.0005 2571-x-3300-a-200b 2571, iec appliance inlet c8, 70c, schutzklasse 2, l: long solder terminal (l=8,5mm), n: long solder terminal (l=8,5mm), erde: without terminal, farbe jet black; ral9005, bauform: flange with through holes, mass x: 00 6160.0006 2571-x-7700-a-100b 2571, iec appliance inlet c8, 70c, schutzklasse 2, l: blade terminal (2,8x0,8mm), n: blade terminal (2,8x0,8mm), erde: without terminal, farbe jet black; ral9005, bauform: flange with countersunk holes, mass x: 00 6160.0007 2571-x-2200-b-100b 2571, iec appliance inlet c8, 70c, schutzklasse 2, l: short solder terminal (l=4,8mm), n: short solder terminal (l=4,8mm), erde: without terminal, farbe silver grey; ral7001, bauform: flange with countersunk holes, mass x: 00 6160.0024 2571-x-2200-b-100a 2571, iec appliance inlet c8, 70c, schutzklasse 2, l: short solder terminal (l=4,8mm), n: short solder terminal (l=4,8mm), erde: without terminal, farbe silver grey; ral7001, bauform: flange with countersunk holes, mass x: 00 6160.0025 the listet variants should be available from stock other versions on request www.schurter.com/contac t packaging unit 100 pcs
connectors (inlets/outlets) 257 www.schurter.com/pg0 7 connectors accessorie s description assorted cover s rear cover mating outlets/connector s category / description power cord overview complet e power cord with iec connector c7, straight 70c 251 0 power cord with iec connector c7, angled 251 1 power cord with iec plug c7, angled 251 4 power cord with iec connector c7, straight 70c 481 0 power cord further types to 257 1 the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
